The 2-minute site check

Pipe size, quarterly spend, and the address produce a preliminary savings projection — live on this page. Photos confirm it.

Rather not do it here?

1Who you are

Own the building yourself? Your own name works as the company.

2The property

Unlocks with your name, company, and email above.

Type the address, then pick a match from the list to lock it in.

3Pipe size

Unlocks with your details above.

What's the pipe size after the meter — the pipe the Flumera valve installs on?

inch
4Water + sewer spend

Unlocks with your details above.

Roughly what does this building spend on water and sewer? A ballpark is fine — it’s the input that turns this page into your projection.

$/ quarter

Recent bills (optional)

Up to 4 — a phone photo or PDF of the last few bills sharpens the projection into a real number.

Still needed: your name, company, and email · a locked-in address (pick a match or confirm manual entry) · a pipe size · spend — a number or the skip.

Preliminary savings projection

Two answers build this number: pipe size and quarterly spend. It calculates right here as you enter them — before you submit anything.

Annual savings, 10% floor
Payback
Property value created
Valve price

Valve price only; install excluded. 20–30%+ of water spend is air — only the 10% floor is promised.

5Photos — or one video

Unlocks once the details above are saved against the property.

A phone photo is enough — no special equipment, no perfect lighting, no retakes for quality.

Two ways to cover it — three photos, or one continuous video. Pick whichever is easier at the meter.

Photo 1 of 3The meter face

Flip the register lid up and wipe the glass with a thumb or rag, then get close enough that the digits fill the frame and keep them level. Brace yourself against something — the room is dark.

Diagram: lifting the meter register cap and wiping the glass
Lift the lid, wipe the glass.
Meter face with digits sharp and readable
Good Digits readable — this is the shot.
Meter photographed with the register cap still closed
Avoid Cap still closed — nothing to read.
Meter face lost to motion blur
Avoid Moved during the shot.

Photo 2 of 3The pipe run into the property

Step back and shoot the pipe on the property side of the meter with the space around it — that answers where the valve can go, the distance to the first flange, and whether anything needs excavating.

Diagram: framing the pipe run past the meter with its surroundings
The run and the room around it, not a close-up.
Pipe run into the property with clearance visible
Good Run, flange, and working space in frame.
A sharp close-up of the meter face, framed too tight for the pipe run
Avoid A perfect meter photo — wrong question here.

Photo 3 of 3The room around the meter

Stand back far enough that the meter and the space around it share the frame — it's how we judge access before anyone visits.

Diagram: standing back so the meter and the room share the frame
Step back until it all fits.
Meter room photographed wide enough to show access and surroundings
Good Wide enough to judge access.
Pipe size + spend → your projection appears here